TO ORDER JUST
CLICK ON THE SHOPPING CART. You can put the book in your shopping cart and
change your mind latter.
|
INJECTION-MOULD DESIGN FUNDAMENTALS
By A.B. Glanvill and E.N. Denton
1965, 5 x 7, Hard, Illustrated, 294pp
$35.95
505-3539
TO ORDER BY CHECK CLICK
HERE
OVERVIEW
This compact reference manual makes available
in one convenient source the theoretical data needed by the advanced engineer
and fundamental information that is too often acquired by time-consuming
empirical observations.
FEATURES
Presents the basic principles underlying
mould design. Provides data on all the component details of the tool. Explains
the construction and operation of the various mould types. Contains four
appendices including a check list for successful mould design, common
trigonometrical problems in mould design, and schematic examples of feed and
ejection that are based on invaluable practical experience and provide time
and money saving information on all aspects of injection mould design.
CONTENTS
Plastics-Mould Manufacturing Methods and
Materials. Aspects of Injection Presses in Relation to Tools. Injection
Moulds- Initial Considerations. Mould Shrinkage, Taper and Tolerances.
Principle Types of Injection Moulds. Tool Construction. Nozzles, Runners and
Gates. Mould Design Check-list. Common Trigonometrical Problems in Mould
Design. Schematic Examples of Feed and Ejection in Moulds. Principle
Conditions in Moulding During Cycle. Index.
BACK TO DESIGN
BACK TO INDUSTRIAL
REFERENCE BOOKS
|